Secrets To Great Bathroom Design And Decorating

Bathroom remodeling ranks number one among America’s most commonly performed home improvements. This is because today, many individuals consider their bathroom to be some kind of personal retreat, a separated space from the noise outside, where they could relax with complete privacy.

The bathroom is no longer just a space for one’s personal hygiene. Today’s design possibilities for bathrooms are limitless.

The standard rules do not apply anymore. Function, openness, performance as well as easy to clean and maintain materials usually top bathroom requirements. When designing your bathroom, take into consideration layout of bath pieces, cabinet placement and your choice of finishes.

Bathroom remodeling cost depends on how much or how little you opt to put in it. A simple improvement that includes a new bath vanity top, accessories and light fixture will cost under 1000 dollars, while a major bath remodeling, taking everything out then begin from scratch can cost 10,000 dollars or more.

With all available new materials, innovative products and design styles of today, your dream bathroom can actually turn into much more than a toilet, shower and sink combo.

Bathroom design Ideas

1.Set a realistic remodeling or makeover budget. When establishing a budget, take into account your bathroom design ideas that you want and if you can afford them.
Also, take note that it is less expensive when you do not anymore relocate the plumbing fixtures like the sinks or toilets; if you have a small budget, consider incorporating the present layout of your bathroom into your new design.

2.Think of function first. Always take into account functionally in mind as your bathroom is your workstation for getting ready for your day ahead as well as your place for recovering and resting after a hectic day. So keep these in mind when selecting your shower, tub, toilet, sink and other bath pieces.

Furthermore, think about what other needs you have that you can include into your bath, with some clever and careful planning; maybe you want to put a seat into your shower or a linen storage space or a “steam room”. Think what you really want, but give prime importance to your needs first, then second, your wants.

3. Collect bathroom models and design ideas. These will be a big help on your project as you can visualize your finished project as well as your remodeling professionals can have an idea on what your requirements are.

Here are some ideas:

– If your bathroom is large enough, you can either a wicker chair or display case. – Mix and match colors for your bathroom. This is fun alternative to a white or gray bathroom. Have fun cool and relaxing colors such as you can turn your bathroom into a beach-like retreat investing in cool shades of blue towels, rugged or distressed antique shelf, a series of colorful picture frames, etc. – Introduce fresh flowers, potted plants or cut tree branches and arrange them in vase. These can liven up your bathroom. – Bring the outside into your bathroom. Put some sea shells, candles, instead of tiles, you can choose to have lime stones in one wall as your focal point with an iron vanity, large plants and wind metal chimes. – Get inspiration from your friend’s house, from an expensive restaurant, a spa or a hotel room.

4.Look into popular design trends in bathrooms.

– Second sinks now are getting to be very popular and trendy in bathroom remodeling because they permit two individuals to use their bathroom together. – Separating your toilet from all other bathroom needs is another trend nowadays. – If you include a shower only in your bathroom, think of replacing it with a “bathtub” that can serve as both a shower also. Whirlpool tubs are becoming popular in bathroom designs today. – A spa-like bathroom is the most popular trend today. So aside from whirlpool baths, natural stone walls and wood flooring, try to open up your bathroom with large windows so you can see nature’s beauty outside as you relax.

Designing your bathroom space must not be just another remodeling project. The focus today has to do with your overall pampering needs and self rejuvenation in your bathroom.

Source by Lee Dobbins

Popular Styles of Bathroom Design

The bathroom has come along way in the past one hundred years. Once just a basic tub set in front of the living room fire and filled with buckets of water, the bathing experience is now a luxury in almost every western home. Back then, a “bathroom” was something only the wealthy and privileged could afford to have in their house. It was this trend which lead to the mass production of bathroom products.
The Edwardian and Victorian styles of the time are still a popular choice today. They look exquisite in a villa or cottage bathroom, and never loose their appeal in terms of design.
Today, thanks to advanced plumbing and modern technology, the bathroom may well have evolved as far as it can. With luxury steam rooms and hydrotherapy baths, it’s difficult to imagine how bathrooms could get any more sophisticated. That said, the bathroom, like any room in the house, is ever changing in terms of design trends.
Here we look at the five most popular styles of bathroom designs. Traditional, Country, Shabby chic, Contemporary and Fantasy.


The Traditional bathroom can mean either traditional in terms of Edwardian or Victorian style, or in respect to a standard white bathroom with basic sanitary ware and bath. Here, we’ll be looking at the style of bathroom design where it all started. The Edwardian bathroom.

Over the past decade, with the popularity of TV shows like Changing Rooms, the trend for old-fashioned bathrooms has seen a real upsurge. A rare gem of an old slipper bath or rusty traditional faucet may be found at a scrap yard or in a skip, but thankfully manufacturers are keeping up with demand with skillfully crafted traditional bathroom products.

Certain rooms only work in certain houses, so if you’re living in a modern high rise apartment the traditional bathroom isn’t going to work for you. If you have an old cottage or villa retreat this style of bathroom is one you should definitely consider.

Almost always, the bath is the centre piece attraction of the traditional bathroom. A free-standing roll-top or slipper bath sits proudly on a dark polished floor, and only if going for a traditional continental style bathroom will an inset or sunken tub hold appeal. Either a wall-mounted faucet or a free-standing one looks classy. Deep ridges and curved angles are what makes the traditional sanitary ware what it is – bold and masculine.

When decorating a traditional bathroom both soft tones and bold colours can work well. Strong tones of browns, maroons and greens give a nice warmth to the room, but be sure the bathroom is well lit, maybe with a lavish chandelier. With the right colours, antique gold can look better than chrome. Go for curtains, never blinds. If going for a vanity unit rather than a traditional basin and pedestal, choose an oak or cherry finish; or the white Cynk vanity unit is a good look with traditional baths and toilets.

One of the most appealing things about the traditional bathroom is clutter gives it more of a lived-in effect, thus enhancing the traditional look. Don’t be afraid to put plenty of pictures on the walls – black and white family portraits in gold frames are a good look. A chest of drawers or corner table with scented candles, aromatherapy oils or flowers will really bring the room to life. As a finishing touch an old style set of weighing scales, a large framed mirror or bulky traditional radiator will give the room that cozy old-fashioned feel.


The country style bathroom is perhaps the easiest type of design to create, and like the traditional bathroom only really works well within the right house. The classic country look is best associated with floral wallpaper, high beams, basin frills and a bath canopy. Following the traditional design, cast iron baths and deep ridged sanitary ware are what gives the country bathroom its nostalgic look.

Check, floral or plaid curtains are preferred over roller blinds, and shutters, though rare in England, offer a great form of privacy as well as adding to the country effect. Wood plays a big part in this look, and almost all furniture works well in this setting, especially beech, maple, ash and oak vanity units and cabinets.

Either tiles or wooden floors can be used. Tiles should be a rustic colour, and can be used to create elaborate mosaics. Wooden floors should be varnished to match the furniture. Decorating may see a stenciled motif used as a border, and the technique of rubbing paint on the walls with a sponge gives the room that worn natural look.

Toilets with high level cisterns and pull chains are very rare these days, but a must have for the country bathroom, as are traditional taps for the bath and basin. Just about any kind of free-standing bath will suit the country bathroom. If wishing to have a shower a tiled walk-in shower is the advisable option with a curtain to conceal the area.

For the final touch add wicker baskets filled with pot pouri, wire basket shelves and stylish wall lamps.

Shabby Chic

“Shabby chic”, a relatively new phrase used to describe room designs, is an obscure blend of neglect and style. It is one of the most difficult bathroom designs to create, and it takes a bold decision to go for this bathroom style. It almost certainly achieves its full potential in a continental house, either a French chateau or old Spanish villa.

The absolute opposite of a fitted bathroom, the shabby chic look is a mismatch of styles and products. You can even do the unexpected, like put a put a refrigerator in the corner. Nothing is expected to match and pipework and plumbing are on show rather than concealed. This style is best suited to those who have inherited a bathroom and want to update it a little rather than fork out on a brand new bathroom suite.

The key to decoration is neutral tones with a few dark colors. For the walls choose a matte or flat wall paint. Pale golds and yellows work particularly well as does floral or check patterned wallpaper.

As with the country and traditional bathrooms, cast iron baths are a must. Either a roll-top or slipper bath will do, and although you don‘t want holes or rust, the more dilapidated it looks the better. Even consider running sandpaper over the paint work and claw feet. It’s always worth looking out for old fittings at antique shops and car boot sales.

Counter top basins are highly recommended in this setting, and the look out for extremely unusual decorated designs. Place it on a washstand or run-down vanity unit. Add unique ornaments and antique framed mirrors.


Modern bathrooms are all about what you do with the space you have. Within many bathrooms there is little room to work with, so making the most of the space is essential. This is why fitted bathroom suites are now so popular. Having bathroom furniture made to measure is one of the most practical design solutions when remodeling the bathroom.

How many of us have had a bathroom with a cluttered airing cupboard? With the modern bathroom there’s no need to cram your toiletries, towels and cleaning fluids around the boiler. With fitted vanity units, storage units and cabinets you‘ll have all the space you need.
When examining modern bathroom design, wall-hung furniture has to get a mention. White gloss will never go out of fashion, but more recently furniture finishes such as wenge, beech and maple have made a real emergence in popularity.

As well as the furniture, wall-hung sanitary ware is a great space-saving solution while giving the bathroom a contemporary feel. Also, concealed cistern units are a more eye-pleasing look than the standard close-coupled toilet.

Showerbaths are a great practical way of optimizing the space, so that you have the comfort of both bathing and showering. Walk-in showers are also very popular in the modern bathroom, and if buying a shower enclosure for the modern bathroom choose one with a chrome structure over white.

Chrome and stainless steel are the ultimate choice in the modern bathroom, and taps and bath mixers are available in a number of contemporary designs, rather than the traditional style faucets. Also, choose chrome towel rails over standard white radiators, as well as matching chrome accessories..

Don’t be afraid to decorate with bold colours when tiling or painting, getting the contrast right with the chrome and the gloss. If using curtains be subtle with the designs and colours, but preferably go for stylish roller blinds.


Daring to be anything more than conventional, the fantasy bathroom design lets you be truly innovative with your fantasies and tastes. With the emphasis on futuristic, this style of bathroom is the antithesis of the traditionalist.

The fantasy design is ideally exclusive to only larger bathrooms, as with all futuristic interior design large open spaces are what brings the room together. Steam cabins and whirpool baths are the ideal choice for showering and bathing. Or combine the two will a well designed bath screen and a glass shower panel. Because of their minimal effect, Walk-in showers also work well with modern tiling, chrome shower fixtures and classy shower lighting.

For the sanitary ware go with wall-hung or standard close-coupled toilet and basin with pedestal with acute angles and a contemporary design. Abstract towel rails and wenge wall-hung furniture fit well in the fantasy bathroom, giving it that calm almost surreal look.
The ultimate luxury in a fantasy bathroom would have to be a waterproof TV. You could even think of doubling the bathroom up as gym, complete with exercise bike and rowing machine.

Ornaments should be unobtrusive, so choose things like small piles of pebbles and modern wall prints over candles and nick-nacks.

Source by Paul Robinson

Claims on Prolongation Costs in Nutshell

It is common practice that time extension claim comes before the claim on prolongation costs. Once an extension of time has been granted, the evaluation of the additional prolongation costs is often related to the period between the contract completion date and the extended completion date. Prolongation cost is also calculated on time related preliminaries. The author contends that this line of thinking is illogical.

The intention of most construction contracts is for the Contractor to be reimbursed the additional cost which results from Employer delays. This involves a comparison between the actual costs incurred and what the cost would have been had no delay occurred. Where, for example, time is lost awaiting details which causes a two weeks delay to the critical path, evaluating the prolongation costs associated with the extra two weeks on site, following the revised contract completion date, would obviously not produce the correct answer. A more accurate evaluation would be achieved by reference to the costs incurred during the two weeks when the information was late in arriving. It is wholly a question of cause and effect.

The SCL protocol in UK, with regard to this matter, states that ‘the recoverable prolongation compensation is to be assessed by reference to the period in which the effect of the Employer Event Risk was felt.’ It is clearly intended that, once it is established that additional payment is due for prolongation resulting from Employer delays, the evaluation should relate to the period when the effect of the delay occurs and not to the overrun period at the end of the contract.

If the party (A) suffers a loss which he is entitled to compensation from the party (B) causing the ‘injury’ (for example a delay), the damages are to put (A) back into the position he was nominally in before the event. Hence, prolongation costs shall be the costs that actually incurred at the period the delay events impacted on the progress, instead of the period of extension. What must be priced is the effect of the delay, and it boils down to a clear analysis of the effects of the delay to ascertain the additional overhead resources which are incurred. It is only if, and when, the project as a whole is extended or prolonged beyond its programmed completion period as a result of the delay to the progress of works that the Contractor would be involved in the extra employment of resources over and above that allowed in the Contract Price. However, that certain resources could also be extended within the original contract period as a result of variations and those extended resources should, of course, be reimbursed to the Contractor.

Traditionally, prolongation costs had been priced by reference to preliminaries. The elements of fixed costs are usually only incurred once and not affected by a delay to the project; that element ought not to be claimed. The time related costs will, unless there is a full suspension of the site for instance, continue through any period of delay and can be claimed ‘at cost’. ‘Cost’ will be calculated in accordance with the terms of the contract. However as safe bet initially is to adopt the time related charge levels in the originally accepted bid, which is simple in approach that any one would prefer to adopt. However, during the 1980s this traditional basis fell into doubt, and that following various cases, standard forms of contract started to insist on the actual loss and expense incurred as a consequence of the Employer’s delay, may be because of the concerns if listed out as follows;

  • Rates quoted for preliminary items could be time, method or activity related or even in doubt as to what category a particular preliminary item would belong to, such as grouting as the tunneling proceeds or dewatering in off shore cofferdam or wet blanketing in a dam defect whenever priced under preliminaries.
  • They are forecasted values quoted in competition while being commercially viable. They are values that the Contractor thought might happen rather than actually happened.
  • They are subject to any pricing strategies such as front end loading, back end loading, or that gives maximum return at completion (in a re-measure contract).
  • Rates quoted for preliminary items, similar to other unit rates, contain a profit element. Actual costs should exclude profits as well as any risk margin.
  • The philosophy behind the compensation is to find the replacement value, like in a typical insurance scheme, in order to bring back the Contractor into the original position where he stood financially had there be no delay.
  • A party should not profit from another’s loss out of eventualities beyond control of either party, say in a prolongation due to adverse inclement weather. This is in line with the principle of good faith and fair dealing.
  • The impact due to prolongation may also depend on the site involvement. For instance, the actual costs on preliminaries at the beginning and end of the progress along with the S-curve may be not as big as in the peak. The amount of additional burden taken over by a prudent Contractor varies with the period as-impacted.
  • A contract may well have many hundreds of variations, and many dozens of these could be critical and contributing to the delay.  Pro rated preliminaries may duplicate the amounts for variations individually priced under clause 52.  If a variation causes standing time (say in shotcreting in rock stabilization), then the Contractor may successfully recover the costs of that standing time as a variation even if it could be shown that the Contractor had no alternative work in any event and would suffer no loss from his idle resources.
  • Concurrent delays are excusable but not compensable, as a principle. Time extension due to concurrent delays can not be payable even with time related preliminaries on pro rata basis.
  • In contracts of civil engineering nature such as mass excavation in a borrow pit, dredging work or in demolition, more than 90% of the cost would be on plant utilization that is priced in a unit rate, say in a rate per m3, apart from preliminary items. Payment on time related basis would be wholly inapplicable when such a contract is prolonged.
  • Time extension due to suspension of whole of the works or delay in site possession (that pushes ahead the planned program as a bunch) may not necessarily cost the preliminaries in full. It may sometimes cost more than what is catered for in the preliminaries.
  • As there is usually a short ad-hoc preliminaries bill, the use of the prelims bill for pricing prolongation is not complete in a sense. For instance, the items under preliminary bill are set out in line with the conditions of contract and specifications (as guided for instance in the Principles of Measurement International 1979). Some items are neither measurable nor priceable.
  • Tender price break up is usually subservient to the contract once obtained after the contract has been let and any particular inclusion or exclusion does not bind the parties in a prolongation issue.
  • The intricacy itself of the issues when they are inextricably intertwined has made more difficult in using preliminaries as the basis of prolongation costs.

On the practice of adjusting for the duplication in recovery of additional overheads, such overheads are recovered in both payment for variations and in the pricing of prolongation costs. This is premised on the basis that the overheads in the BQ rate should not be adjusted where the variation may cause a critical delay when it would not be adjusted if the variation has not caused delay. To deduct this allowance in the BQ rate because the Contractor has incurred a delay would place the Contractor in a worse position than it would have been absent any delay. Usually, the overheads in the BQ rates which are used to price variations are not adjusted. However, it is the loss and expense which is adjusted, not the BQ rate. Not to do so would mean that the Contractor would be paid twice for some element of his additional overheads, which is not intended in contract?

Let us assume an interim claim in a road widening project to a cut off date say, 31 Dec 2006 (effects are continuing as per the Contractor so that the Contractor can submit any number of claims till the effects cease). It has two components; extension of time and additional cost due to disruption occurred in selected areas and it excludes the cost of unproductive working (ie, loss of productivity). The Contractor says delay events are widespread and extensive and only the main events have been considered, (altogether meaning that the Contractor intends to submit further claims). He may amend or update the contents at a later time whether the same is contained in this submission or otherwise, as he deems strategic. However, the source of claim is the disruption (although disruption does not necessarily cause delay in scheduled completion) resulting from existing utilities that were in excess of utilities indicated in contract drawings, utilities not in the locations indicated in these drawings, inadequate service corridor space provided in the Employer’s design, existing utilities already situated within the corridors, unforeseeable underground cavities, re-design of pump stations, encroachment on the Contractor’s ROW to an underpass, prevention of trial excavations and utility relocation and excavations withheld.

Hence, it is important to look at the entire scenario from a broad perspective. Despite, the Engineer’s assessment has been based on preliminary items. This is not contractual also because each issue shall be evaluated on its own merit as addressed under various contractual provisions in which we find the phrase ‘proper and reasonable expense’. Since preliminaries are not ‘expenditure properly incurred or to be incurred’, the actual expenditure needs to be determined. This would eventually include time-related preliminary items, (for instance, the costs to be incurred in keeping the performance bond and insurance on extra premium) shall also be payable to the Contractor.

Where the Employer is responsible for disruption to the progress of works i.e., where he has disturbed progress to items on the critical path so that the Contractor is delayed in the completion of work and suffered additional costs in completing the works, the Contractor may claim the cost of wasted or increased overheads incurred as a consequence of the disruption. As with other claims, the principle problem with providing evidence in support of such claims is not so much in identifying the actual cost incurred but in satisfying the Engineer that any additional cost claimed arises as a result of the event relied upon. In other words, the challenge is to satisfy the Engineer that, but for the disruptive event, the cost to the Contractor would have been less than it actually turned out to be and that the difference arose as the result of extension because of disruption.

Once established that the delay was unforeseeable, uncontrollable, critical and causative, the Contractor does get the extension of time but he is only entitled to any loss and expense incurred as a specific consequence of the Employer-caused delay. This basically means that if the Contractor is able to identify extra costs at the activity or event level, he recovers these but not the general running costs of the project. 

Also, the author prefers the term ‘actual loss’ instead of ‘actual cost’ for clarity. The Contractor should be entitled only for the actual loss and not the actual cost (in other words, the difference between the actual cost incurred in delay and the cost that would have incurred under normal circumstances as planned for which the contract rates are inclusive of basic cost, overhead and profit). The sum so arrived will eventually cover up any escalated component in prices of materials and labor and any loss of productivity. This will avoid possible over-compensation. All the cost items shall only be defensible with site records and other documentary evidence. The extent of entitlement and then the quantum has to be decided on the foregoing principles.

In nutshell, it is eligibility that follows quantum. The use of preliminaries on pro rata basis would not truly result the actual loss in prolongation. The level of compensation is what is reasonable in the circumstances. Each case shall be evaluated on its own merit. If the cost difference can be seen as being not too remote from the original event it may be recoverable. The industry has accepted that the correct means of evaluating prolongation costs is by reference to actual expenditure, justifiable upon contemporary records.  

Unless otherwise the parties have taken on board by contract the risk of pro-rata application of time related preliminaries, the author is scared of recommending so-called ‘preliminary’ method, instead any method that is capable of finding the actual loss is admissible and the answer is ‘it depends on the issues’ where the expertise of the quantity surveyor triumphs.  Seldom does one size fit all.

Source by Dr. Chandana Jayalath

Finding The Perfect Sink For A Small Bathroom Remodel

Intuition tells most homeowners it is a simple matter to find the perfect sink for a small bathroom remodel. Not too long ago, this was true. But today, there is an array of possibilities. There is great variety in sink materials, installation styles, colors, shapes, and even hardware (or fittings and faucets). All of these factors will determine the suitability of a particular sink for your small bathroom remodel.

The sink you choose for your small bathroom remodel and the specific place you position it in the room will define a great deal of what else you can do in a small space. A new sink for your remodeled bath can cost as little as $100 or somewhat over $1,000. It is usually a good idea to decide how much you can afford to spend on a sink and decide on the major design features and style of your bathroom before you shop for a sink. This will help you stay on track when you see some of the trendy or flashy styles that are available. Keep in mind also that many stores display only the most popular styles and colors in their showrooms. It will probably be worth your time to ask about other options and to check online stores and manufacturers.

Materials: Most sinks are made of enamel, porcelain or china over cast iron or steel. These materials have been used for a very long time. Their durability and ability to resist stains and mildew have made them extremely popular. They are available in almost any color imaginable and any installation style. As bathroom design and décor has become more important in recent years, sinks are now produced in a wide variety of materials, including solid surface materials, acrylics, glass, metals, concrete, cultured stone and genuine stone. Consider who will use the sink when you decide on the material, because stone and concrete will be relatively high maintenance and need sealing and regular re-sealing and glass and metals can scratch easily.

Installation: Your decision to include or not include a vanity in your remodeled small bathroom will narrow your sink installation options.

  • If you are not using a vanity, your sink will probably be a free-standing or a wall-mounted style. These sinks use very little space, making them ideal for a small bathroom. They are also highly preferred in bathrooms fitted for accessibility. Whether they rest on a pedestal or attach to the wall, the plumbing will be visible (considered a downside by some). They also offer no storage space. In addition to actually requiring less space, these models make your bathroom appear larger.
  • If you are including a vanity, you might choose the smoothness and sleek continuity of a solid surface vanity top and sink. This is one continuous piece that includes the sink. This style is also possible with stone (granite, marble), cultured stone and concrete. Stone and concrete will require sealing and resealing. These sinks tend to be shallow as compared to some other styles.
  • Drop-in sinks have a rim that overlaps the edge of the countertop. These are inexpensive and easy to install, making them a great choice for the do-it-yourselfer. Look for a style that has some depth to limit splashing on the surrounding area of the countertop.
  • Under-mounted sinks attach to the underside of the countertop. These are very popular because they create a smooth surface that takes full advantage of every inch of surface space. This style of installation, however, limits your countertop choices to a material that is completely waterproof (no standard laminate or wood and no natural stone or concrete unless it is carefully sealed).
  • Countertop installation has become very popular in recent years, although this trend is beginning to wane. This type of installation uses specialty styles of bowls which sit atop a counter or piece of furniture. These styles tend to be costly and installation can also be expensive.

Current trends in bathroom design have focused on exotic materials, unusual shapes, vivid colors, and attempts to use furniture for vanities and cabinets. Small bathroom dimensions will probably prevent you from using furniture, unless you have been able to find a very small antique piece that can serve as your countertop.

Special considerations for small bathroom remodeling: One of the most important considerations in small bathroom design and decoration is maximizing space. This tends to suggest wall-mounted or pedestal sinks or very small and open vanities or surrounds for the sink. Color, shape and material will be largely determined by your style and design and your budget. Remember that lighter colors tend to make rooms look larger, as do vertical stripes. Think carefully also about what you want to be the focal point in the room – the sink, the shower, the tub surround, etc.

To create the perfect small bathroom remodel, take the time to shop broadly for the sink. Consider how the bathroom will be used (guest bath, children’s bathroom) in choosing the material of your sink. In designing your small bathroom, consider first and foremost the type of installation and the position of your sink to leave maximum floor space and create the impression of spaciousness in the room. No matter what your decorating style or your budget, you can find the perfect sink for a small bathroom remodel.

Copyright 2010 by Dan Fritschen

Source by Dan Fritschen

Installing New Bathroom Taps

Would you like to save money, make your bathroom look better, and be able to take pride in the fact that you did it yourself? Deciding to start a home improvement project can be a little freighting but with the right tools and information, you will soon be on your way. You will have the confidence to do it yourself and know that you have done a good job.

The first step to getting started with your new tap project is getting the information to do the job. You need to consult the web and/or educational books to make sure that you have all that you need to make this process happen.

Once you have all your information compiled and feel ready to undertake your home improvement project, you need to look at all the different tap manufacturers for the best quality for the money you are willing to spend. You will want to purchase a tap that is durable, as well as, blending well with your existing bathroom accessories.

You now have the perfect tap purchased. It is sitting in its box awaiting its new home on your bathroom vanity. You need to make sure that you have the correct tools available. This would include:

A basin cock wrench or pipe wrench
Philips-head screwdriver
Flat-head screwdriver
Slip-joint and adjustable pliers
Adjustable wrench
Bathroom caulk and caulk gun (plumber’s putty will also work)
New flexible tap supply tubes
Thread sealer

Your next step in this process would be to remove the old tap. To do this, you will need to shut off your water supply either under the sink or at the main water-supply valve. The hot and cold water supply tubes will need to be loosened. At the tap stem, loosen and remove the compression nut with a basin cock wrench or pipe wrench. To remove the tap now, all that you need to do is remove the nut holding the tap to the sink. The tap should lift off.

Chrome-plated brass hardware may start to decay after time so you may wish to change that as well. A bucket should be placed under the drain to contain excess water still in the drain. A new stopper may come with your new tap. If this is the case, you might like to change that also. This will give you a consistent look on your new design.

You will need to wrap your tap stems with a thread sealer. Before inserting the tap stems into the correct holes install the rubber gasket to the base of the tap. Don’t worry if your tap did not come with a rubber gasket. A bead of caulk will do the trick. When you have the tap in position, you can thread the washer, nut, and mounting nut on to the tap tailpiece. Tighten these nuts by hand.

You may now attach your supply tubes to the tap stems. Make sure that you apply thread sealer to the shut off valve threads. Tighten the coupling nuts to the supply stems. Be careful not to over-tighten the nuts. Reconnect the hot and cold water supply stems.

You are now ready to clean the supply tubes to your new tap. To do this you need to remove the aerator from the tap. Now turn on the water. You will need to check for leaks while the water is running. If there are none, shut off the water and replace the aerator.

Now sit back and enjoy your new bathroom tap. You can take pride in the fact that you just installed it yourself.

Source by John Pawlett